STANDARD MODULE BARRIER AGAINST JELLYFISH AND ALGAE, 20 M LONG - MDR0001
Net barrier designed to act as a barrier against jellyfish and algae. PATENTED
Floating part made in tearproof fabric in black with very high resistance against UV rays. Submerged part in black polyethylene net with 25 mm mesh. 25. Extra net tape for anchorage.Upper slots for mooring
MODULE MEASURING 20 METRES LONG AND 2 METRES DEEP
Complete with hinge for junction with any subsequent module
1921,50€ pieceVAT INC.
DO YOU HAVE A VAT NUMBER?Register for reserved prices
MODULE, 20 M LENGTH AND 3 M DEEP‘JELLYFISH BARRIER
This is a floating barrier that acts as anti-jellyfish and anti-algae, made of mesh and fabric and patented by Retificio Ribola. The above-water part è is made of a micro-mesh fabric of very high resistance that envelops cylindrical floats with diameters of around 20 cm. The floating par è is designed to prevent the passage of jellyfish even in the event of wind and waves.On the floating part, openings are made designed to‘for inspection of the floats and their transport. The barrier is usually supplied with floats in high-density polystyreneà. On request, also supplied with inflatable floats designed for&asop;marine use. The submerged part è is composed of mesh net, woven high-strength fiberà, treated for UV rays, which acts as a barrier against jellyfish but enables the current to pass through, reducing the drag of the’entire barrier .l‘anchorage is by a high-strength, extra mesh bandà firmly stitched on the entire length and designed to act at a connecting point for the anchors. Bands for l’ beach or sea mooring. The joining of one module to‘another is done through high-strength hingesà for marine use
All the stitching is done with very-high strength yarnà for marine use, resistant to‘seawater.‘
This is a floating barrier that acts as anti-jellyfish and anti-algae, made of mesh and fabric and patented by Retificio Ribola. The above-water part è is made of a micro-mesh fabric of very high resistance that envelops cylindrical floats with diameters of around 20 cm. The floating par è is designed to prevent the passage of jellyfish even in the event of wind and waves.On the floating part, openings are made designed to‘for inspection of the floats and their transport. The barrier is usually supplied with floats in high-density polystyreneà. On request, also supplied with inflatable floats designed for&asop;marine use. The submerged part è is composed of mesh net, woven high-strength fiberà, treated for UV rays, which acts as a barrier against jellyfish but enables the current to pass through, reducing the drag of the’entire barrier .l‘anchorage is by a high-strength, extra mesh bandà firmly stitched on the entire length and designed to act at a connecting point for the anchors. Bands for l’ beach or sea mooring. The joining of one module to‘another is done through high-strength hingesà for marine use
All the stitching is done with very-high strength yarnà for marine use, resistant to‘seawater.‘
With PayPal you can pay in THREE TRANCHES WITHOUT INTEREST.
For orders from € 30 to € 2000
For orders from € 30 to € 2000
prices rounded to 2 decimal places
AMOUNT
Price VAT included
TOTAL0,00 € (0,00 € + VAT)
USERS ALSO SHOP
ACCESSORIES